• What is the barrel? What is the structure of the barrel?

    What is the barrel? What is the structure of the barrel?

    What is the barrel? The barrel is the same as in the extrusion compression molding system and is an important part of the extruder. The barrel and the...

    17-09-2021 Industry News
  • Technical characteristics of granulator

    Technical characteristics of granulator

    The shape design of the screw has been changed, and the thread spacing between the screws has been increased. When heating, the plastic can be fully p...

    10-09-2021 Industry News
  • The structural characteristics of the screw and barrel of the film blowing machine

    The structural characteristics of the screw and barrel of the film blowing machine

    The screw section of the film blowing machine is a screw groove with a fixed groove depth. In addition to its main functions of mixing, output and mea...

    02-09-2021 Industry News
  • Drawing method of granulator

    Drawing method of granulator

    The traditional method of drawing strips is to stretch the strips through a cooling section (the most commonly used is a water bath), which sometimes ...

    27-08-2021 Industry News
  • Precautions for granulator

    Precautions for granulator

    First, matters needing attention 1. The granulator should run forward; avoid reverse rotation. 2. The granulator is forbidden to run empty without loa...

    20-08-2021 Industry News
  • Conical twin screw

    Conical twin screw

    The conical twin screw is different from the parallel twin screw in appearance. Its two ends have different diameters. The diameter of the feeding sec...

    12-08-2021 Industry News
Contact US